View All Marshall | New Tubes | Stupid Deal of the Day | Email Page | Gear

Home / Amplifiers / Vintage Series /
Marshall JCM800 2203X Amplifier

Marshall JCM800 2203X Vintage Series Tube Amp


Buy it!



We love this amp! This is a single channel amplifier without reverb or other features to muddy the sound. If it's tube tone you want, this is the amp for you!

The 2203 was the first Marshall to feature a Master Volume control, allowing guitarists to crank the preamp for maximum overdrive while keeping the power amp to reasonable listening levels.

The sound is very throaty, thanks to the three 12AX7A (ECC83) preamp tubes. Three band EQ with presence control to dial in your favorite sound. The only addition to this reissue is an effects loop, allowing you to insert your favorite time-based effect (reverb, delay, chorus, flange, etc.) between the preamp and power amp sections.

In 1975, Marshall unveiled the original model 2203 head, which produced 100 watts RMS from four EL34 output tubes (valves). In 1981, Marshall introduced the JCM800 series version of the 2203, and redesigned the cosmetics, adding the large logo and grille cloth over the front baffle. The electronics, however, remained unchanged. The 2203X 'reissue' model was introduced by Marshall in 2002.


        You've heard the original 2203 used by artists such as Eddie Van Halen (1981-90 'brown sound' era), Kerry King, and Zakk Wylde. Now you can own this amp yourself without having to pay for the cost of a vintage amp, or worry about taking it on the road.

Features and Specifications

  • 100 watts RMS
  • Power amp section: four (4) x EL34 tubes
  • Preamp section: three (3) x ECC83/12AX7A tubes
  • True bypass series FX loop
  • 3-band EQ (rotary type)
  • Presence control (rotary type)
  • Dimensions (inches): 30 W x 12 H x 9 D
  • Dimensions (mm): 750 W x 310 H x 220 D
  • Weight: 41 lbs / 19.8 Kg

Suggested Setups

Marshall JCM800 Head and 1960AV/1960BV Cab Full Stack PackageMarshall JCM800 Head and 1960AV/1960BV Cab Full Stack Package - The 1960AV and 1960BV cabs are backline staples that each feature 4 Celestion Vintage 30 12" speakers and an impedance (4 or 16 ohm) mono/stereo switching mechanism. More... Marshall JCM800 2203 Head and 1960AV Cab Half-Stack PackageMarshall JCM800 2203 Head/1960AV Cab Half-Stack Package - The Marshall 1960AV 4X12 guitar cab features 4 Celestion Vintage 12" speakers and mono/stereo operation. More...



Copyright © 1996-2008 Marshall Arts, a division of Blamepro.com.
Trademarks and copyrights used herein are the property of their respective holders.
Marshall Arts is not affiliated with Jim Marshall Products, plc.