Click for Marshall Arts!

Introduction and Features | Previous Products | Amplifiers | Home
Marshall JCM 900 Hi Gain Dual Reverb
Specifications by Model Number


JCM900 Dual Reverb Head

The Marshall Hi Gain Dual Reverb amplifier was designed to provide two different, foot-switchable tones from a single chassis. Produced in several different configurations, the Dual Reverb was arguably the most popular amplifier in the JCM 900 series.


Model 4100

  • Amplifer head only (requires separate speaker cabinet)
  • 100 watts RMS
  • Dimensions: 750 (W) x 310 (H) x 220 (D) mm
  • Weight: 18.8 kg


Model 4101

  • Combo Amp (amp + speaker)
  • 100 watts RMS
  • 1 x 12 Celestion G12-100 8 ohm speaker
  • Dimensions: 500 (W) x 470 (H) x 290 (D) mm
  • Weight: 23.9 kg


Model 4102

  • Combo Amp (amp + speakers)
  • 100 watts RMS
  • 2 x 12 Celestion G12-175 16 ohm speakers
  • Dimensions: 670 (W) x 520 (H) x 250 (D) mm
  • Weight: 28 kg


Model 4500

  • Amplifer head only (requires separate speaker cabinet)
  • 50 watts RMS
  • Dimensions: 750 (W) x 310 (H) x 220 (D) mm
  • Weight: 17.4 kg


Model 4501

  • Combo Amp (amp + speaker)
  • 50 watts RMS
  • 1 x 12 Celestion G12-75 8 ohm speaker
  • Dimensions: 500 (W) x 470 (H) x 290 (D) mm
  • Weight: 21.2 kg


Model 4502

  • Combo Amp (amp + speakers)
  • 50 watts RMS
  • 2 x 12 Celestion G12-75 16 ohm speakers
  • Dimensions: 670 (W) x 520 (H) x 250 (D) mm
  • Weight: 26.6 kg
Introduction and Features


Marshall P802 Dual Footswitch

Marshall P802 Dual Footswitch

2-button footswitch provides channel and reverb switching. For use with Marshall JCM900 series amps.




Click for Marshall Arts home page

Check prices at Musician's Friend

Previous Products | Amplifiers | Home



Copyright © 1996-2008 Marshall Arts, a division of Blamepro.com.
Trademarks and copyrights used herein are the property of their respective holders.
Marshall Arts is not affiliated with Jim Marshall Products, plc.